| Subject | Text |
| Rest code cd canon pro 9000 mark II | Rest code cd canon pro 9000 mark II
and canon 4850
to rest ink pads and have contact with printe |
| Ok so here is where the dumb questions start....
What are the output IC's?
Where should I be t |
|
|
| Req: JVC HRS5950 VCR Diagram or deck nr | Hello,
Can anybody upload the schematic diagram for the JVC HRS5950, or tell me the deck number. |
| It sounds like the primairy side of the power supply isn't starting correctly.
As you allready me |
| Try changing your PAL/NTSC setting in de "video-setup" menu!!
That should help!
Grtz Mark |
| Samsung SP42W5HFX (J52A chassis) Projection TV | Hi,
I'm looking for a schematic diagram for:
Samsung SP42W5HFX (J52A chassis) Projection TV
|
| Hmm, I'll gues I mixed up the autocoupler and controller IC, my english isn't a 100 %, sorry :lol: |
| A fuse almost never just blow, without a cause. So just replacing them without repairing the cause i |
| Thanks Mark, You were right. The two 5 Amp and One 2 Amp were also blown. Replaced and at least got |
| MN101C51FFA: microcontroller? Can somebody offer some help | Hi guys!
OK, so after I followed Al_Dodge_Bundy's advice (thanks again Mark!), I think that what |
| Sometimes, cleaning the laser will resolve reading problems...
Don't know if you've done that alr |
| Re: Looking for JVC MX-D401T service manual | [quote:8e12a9bff2="Al_Dodge_Bundy"]Hi,
I'm looking for the JVC MX-D401T service manual.
If som |
| dear mark thanks for help. I have seen those 2 faults you wrote.
1. In one Tv i got sound ( |
| Check if there is a NiCad/Li battery on the mainboard somewhere.
If there is, it probably lost it |
| Hello Georgio,
Found this on the net (for use when Pin-code is not known)
PRESS VOL - ON TV &a |
| thanks for that Mark! |
| H.P CSN EMEA Site: Serial / Productcode match question | Due to the fact that many customers only supply their s/n, when loggin a service call, it sometimes |
|
|
| Toshibas and the like | Hi there Larry and Tibor,
last night I repaired my Toshiba. Larry, you are completely right, the |
| Looks very nice, I'll try to get there sometimes in the future.
Grtz Mark |
| Thank you for a quick answer Mark.. :D
Yes heaters are working an I can feel and hear static whe |
| Hello Paul,
Win-Rar is a program to compress files, wich you want to distribute by e.g. the inter |
| There could be a short on the mainboard.
Try to measure if there is a short on e.g. the high volt |
| Computer shuts down abnormally! | Just had another thought.
If you right click on "my computer" followed by properties and |
| Hi Mark,
That’s a very logical approach. Yes! I can move each color line and save it too. Horizon |
| If you have no experience in tv-repair, YES you should be very carefull when soldering on the inside |
| I'll always dip new tips in a bit of solder. So the tip gets a protective coating.
Also, when cle |
| Indeed sounds like a bad memory or microprocessor.
But it could also be a bad connection between |
| Hi,
Just a few questions,
1) Start by checking which cicruit is failing.
E.g. Do you have pow |
| [quote:312c9ca9d2="Al_Dodge_Bundy"]Is the main fuse blown?
If yes, there's a problem in the prima |
| If you've already replaced the capacitors (better spelling as "capacitators" :D ) and the power sup |